Replacement gear kits, copy remotes, decorative hardware, universal receivers and Wi-Fi control. What each accessory is for, who buys it, and how to attach it to an opener order.
An opener is a one-off sale. Accessories are the repeat business. A distributor who stocks openers but not the five categories below ends up sending the customer to a marketplace for every lost remote and every worn gear — and loses the margin twice.
Here is what each of the Autogatelink accessory lines is actually for.
What it is: a gear and sprocket kit, typically compatible with 1/3 HP and 1/2 HP chain-drive garage door openers. A replacement part.
Who buys it: anyone with an older chain-drive opener whose drive gear has stripped. This is the classic failure mode on chain-drive units — the door stops, the motor still runs, and the whole opener looks dead when the actual fault is one worn plastic gear.
Why it matters commercially: it converts a "your opener is finished, buy a new one" conversation into a low-cost repair. That builds loyalty, and it costs almost nothing to hold in stock. Sell it as a kit, not as a loose part, and include it in the spares recommendation with every chain-drive opener you ship.
What it is: a face-to-face copy duplicate multi-frequency universal garage door remote control.
| Parameter | Value |
|---|---|
| Operating voltage | DC 6V |
| Operating current | ≤ 12 mA |
| Operation frequency | 303MHz / 310MHz / 315MHz / 433.92MHz / 868MHz, optional |
Who buys it: the household that has lost a remote, or has one remote and three drivers. A face-to-face copy handset clones the signal from an existing working handset — no soldering, no opening the motor, no DIP switches to read.
Selling point: multi-frequency coverage from 303MHz up to 868MHz means one SKU serves most of the installed base in a market. That is the single most useful thing about a copy remote for a distributor: fewer SKUs, fewer stockouts. The ≤ 12 mA draw at DC 6V is what gives it a usable battery life in daily service.
One honest limitation to state up front: a copy remote reproduces the signal of an existing handset, so it is the wrong product for a system using rolling code security. Match it to fixed-code installations and you will have very few returns.
What it is: decorative garage door hinges and handles. Faux garage door accents in metal, screw mounted, black, spear style. The kit contains 4 hinges and 2 handles.
Who buys it: the homeowner refreshing a plain steel sectional door without replacing it. Carriage-house style hardware changes the entire look of a facade for a fraction of the cost of a new door.
Selling point: it is screw mounted, so installation needs no modification to the door panel and no specialist tooling. It sells on photographs, which makes it ideal for a showroom display and for photo-heavy listings. Bundle it with a K8 Plus Pro opener and the whole garage reads as a premium installation.
What it is: a garage door remote control receiver, multi-frequency 300-900MHz, with transmitter, DIP switch coding and 2 channels.
| Parameter | Value |
|---|---|
| Channels | 2 CH |
| Working voltage | AC/DC 9~30V |
| Frequency | 300MHz ~ 868MHz |
| Application | Villa, school, hotel, apartment, hospital, office |
Who buys it: installers retrofitting an existing motor that has working mechanics but a dead or insecure radio board; and property managers who need to add a second channel for a pedestrian gate or a second door.
Selling point: the 9-30V AC/DC input range is what makes it genuinely universal — it will run off the control board of almost any motor on site without a separate supply. Two channels means one receiver can handle two doors, or a door plus a gate. The commercial application list is exactly where this sells: schools, hotels, apartment blocks and offices buy receivers in quantity, not one at a time.
What it is: a Wi-Fi garage door opener module for home automation, letting the door be controlled from an Android or iOS mobile device. Compatible with Alexa and Google Assistant.
| Parameter | Value |
|---|---|
| Operating mode | ON-OFF |
| Contact type | Normally open, normally closed |
| Connector type | Screw terminal |
| Switch type | Push-button |
| Terminal | Screw |
| Material | Plastic |
| Mounting type | Wall mount |
| Actuator type | Push-button |
| Contact material | Plastic |
Who buys it: the homeowner who wants to check the garage door from their phone and open it for a delivery, but has no intention of replacing a functioning motor.
Selling point: normally open / normally closed contacts with screw terminals mean it wires into an existing control board rather than replacing it. Wall mounted, plastic housing, push-button actuator — a straightforward retrofit. Voice control through Alexa and Google Assistant is now a standard expectation in residential projects, and this is the cheapest way to meet it.
The pattern that works:
All five lines ship alongside opener orders and are available for OEM and ODM projects. Tell us the target market and we will confirm frequency options and packaging.